Articles
banner
  • inscription

Liste des articles 2017

 

A1-17.  Wissem Elkhal LETAIEF, Tarek  HASSINE & Fehmi GAMAOUN

"In situ stress relaxation mechanism of superelastic NiTi shape memory alloy under hydrogen charging". Philosophical magazine letters, 2017, DOI: 10.1080/09500839.2016 1273556  IF: 1.194

-------------------------------------------------------------  

A2-17. Wissem Elkhal Letaief, Tarek Hassine & Fehmi Gamaoun

" Tensile behaviour of superelastic NiTi alloys charged withh ydrogen under applied strain"

Materials Science and Technology, DOI: 10.1080/02670836. 2017.1320084  IF: 1.803

-------------------------------------------------------------  

A3-17. W. ElkhalLetaief, T. Hassine and F. Gamaoun

"A coupled model between hydrogen diffusion and mechanical behavior of superelastic  NiTialloys” Smart Materials and structures, 26 (2017) 075001 (11pp) IF: 2.963

 ------------------------------------------------------------- 

A4-17. Houssein LAMINE, Med Amine LARIBI, Sami BENNOUR, Lotfi ROMDHANE, Said ZEGHLOUL

" Design study of a cable -based Gait Training Machine". Journal of Bionic Enginnering 14 (2017) 232-244  IF: 2.325

-------------------------------------------------------------  

A5-17. A. BAHLOUL, A. BEN AHMED, M.M. MHALA, C.H. BOURAOUI

"Probabilistic approach for predicting fatigue life improvement of cracked structure repaired by high interference fit bushing". Int J Adv Manuf TechnilDoi 10.1007/S00170-016-9957-62017

IF: 2.601

-------------------------------------------------------------  

A6-17. A. Bahloul, CH. BouraouiT. Boukharouba

" Prediction of  fatigue life by crack growth analysis" , International Journal of Advanced Manufacturing Technology 2017  IF: 2.601.

-------------------------------------------------------------  

A7-17. Nasr, Y.Nadot, Ch. Bouraoui and R. Fathallah

"Fatigue life assessment for material containing defects under multiaxial loading"

Metallurgical Research & Technology EDP Sciences, 2016 Volume 114, Number 1, 2017 IF: 0.574

 ------------------------------------------------------------- 

A8-17. Aymen Khadr Ajmi Houidi  and Lotfi Romdhane

"Dynamic modelling and handling study of a two wheeled vehicle on a curved track"

Mechanics and Industry

Volume 18, Number 4, 2017  IF: 0.659

-------------------------------------------------------------  

A9-17. Nasr, W. Hassine, Ch. Bouraoui

"Fatigue limit assessment for defective materials based on affected depth "

Mettal. Res. Technol. Vol, No (2017) DOI: 0.1051/ métal /2017045  IF: 0574

 ------------------------------------------------------------- 

A10-17. Mariem Dakhli & Atef  Boulila & Zoubeir  Tourki

"Effect of generatrix profile on single-point incremental forming parameters"

Int J Adv Manuf Technol DOI 10.1007/s00170-017-0598-1 IF: 2.6

 ------------------------------------------------------------- 

A11-17. Mohamed Abdelbasset Yousfi, Cheima Ammari, Khalil Hajlaoui, Nikolaos T. Panagiotopoulos, Zoubeir Tourki

" On a new electromechanical switch using the reversible wavy elastic response of metallic glass ribbons ". Comptes Rendus Mécanique, CRMECANIQUE-D-17-00092R1  IF: 1.127

 ------------------------------------------------------------- 

A12-17. M.A. Yousfi, N.T. Panagiotopoulos , A.M. Jorge Junior, K. Georgarakis, A.R. Yavari

"Novel micro-flat springs using the superior elastic properties of metallic glass foils"

Scripta Materialia 131 (2017) 84–88  DOI: 10.1016/j.scriptamat.2017.01.012  IF: 4.163

-------------------------------------------------------------  

A13-17. S. Arfaoui, F. Zemzemi & Z. Tourki

"Relationship between cutting process parameters and white layer thickness in orthogonal cutting"

DOI:  10.1080/10426914.2017.1364849  On ligne: 18 August 2017  IF: 2.669

-------------------------------------------------------------  

A14-17. Mhalla Mohamed Makki, Bahloul Ahmed, Bouraoui Chokri

"Reliability prediction of the stress concentration factor using response surface method"

Int J Adv Manuf Technol    DOI 10.1007/s00170-017-0910-0  IF: 2.601

-------------------------------------------------------------  

 

A15-17. Maroua Saggar, Haifa Sallem, Chokri Bouraoui

"Fatigue life prediction under variable loading based on a new damage model devoted for defective material"

Int J Adv Manuf Technol https://doi.org/10.1007/s00170-017-1198-9  IF: 2.601

-------------------------------------------------------------  

A16-17. Sami Bennour, Baptiste Ulrich, Thomas, Legrand, Brigitte M.Julien Favre

"A Gait Retraining System using Augmented-Reality to Modify Footprint Parameters: Effects on Lower-Limb Sagittal-Plane Kinematics"

Journal of Biomécanique, Octobre 2017 IF: 2.431.

-------------------------------------------------------------  

A17-17. S. Bennour, B.Ulrich, T. Legrand, B.Jolles, J. Favre

"Effets of foot progression angle on knee biomechanics during gait modification"

Journal des méthodes informatiques en Biomécanique et génie biomédical, Vol. 20, No. S1, Octobre 2017  IF: 1.974

-------------------------------------------------------------  

A18-17. H. Lamine, S. Bennour, MA Laribi, L. Romdhane, S. Zeghloul

"Evaluation of Calibrated Kinect Gait Kinematics Using a Vicon Motion Capture System"

Computer Methods in Biomechanics and Biomedical Engineering, Vol.20, No. S1, October 2017 IF: 1.974

 ------------------------------------------------------------- 

A19-17. Shirinbayan M, Fitoussi J, Meraghni F, Surowiec B, Laribi M.A, Tcharkhtchi A.

"Coupled effect of  loading frequency and amplitude on the fatigue behavior of advanced sheet molding compound (A-SMC)", Journal of Reintforced Plastics and Composites; 36(4): 271-282 (2017), IF: 1.471

 ------------------------------------------------------------- 

A20-17. Meftah, H., Tamboura, S., Fitoussi, J

"Characterization of a New Fully Recycled Carbon Fiber Reinforced Composite Subjected to High Strain Rate Tension". Journal of applied composites materials, https: //doi.org/10.1007/s10443-017-9632-6 (2017), IF: 1.333

  -------------------------------------------------------------

A21-17. A. Bahloul, A. Ben Ahmed, CH. Bouraoui

"Probabilistic fatigue crack growth assessment of A1 7075-T6 aerospace component. Structural Integrity Procedia 5 (2017) 430-437.  Indexé

   -------------------------------------------------------------

A22-17. A. Bahloul, A. Ben Ahmed, M.M. Mhallah, CH. Bouraoui

"An Engineering Predictive Approach of fatigue crack growth behavior: case of the Lug-Type Joint". Comptes Rendus-Mécanique 2017  IF: 1.127.

    -------------------------------------------------------------

A23-17. Hajloui, K., Alsaleh, N., Alrasheedi, N.H., Yavari, A.R.

" Coalescence and subsequent twinning of nanocrystals during deformation of CuZr-based metallic glasses: The grain size effects, Journal of Non-Crystalline Solids 464, pp.39-43 (2017) IF: 2.488

   -------------------------------------------------------------

A24-17. Jbira, M. Tlija, B. Louhichi, A. Tahan,

"CAD/Tolerancing Integration :Mechanical Assembly with form defects, Advances in Enginnering Software 2017, (https://doi.org/10/1016/j.advengsoft.2017.07.010)  IF: 3.198

   -------------------------------------------------------------

A25-17. B. BEN FRAJ, A. GAHBICHE, S. ZGHAL and Z. TOURKI

" On the influence of the heat treatment temperature on the superelastic compressive behavior of the Ni rchi Niti shape memory alloy", Journal of Materials Engineering and Performance. (Septembre 2017). DOI: 10.1007/s11665-017-2974-2 JMEP-17-02-12461.R.  IF: 1.34

   -------------------------------------------------------------

A26-17. Rihab GRISSA, Farhat ZEMZEMI, Raoudha SEDDIK, Raouf Fathallah,

"A Numerical-Analytical Approach to Predict High Cycle Fatigue Performance of Finish Machined AISI 316 L Steel". International Journal of Advanced Manufacturing Technology (2017) in press IF: 2.601.

   -------------------------------------------------------------

A27-17. R. Grissa, F. Zemzemi, R. Fathallah

" Three approaches for modeling residual stresses induced by orthogonal cutting of AISI316L". International journal of Mechanical Sciences (2017), Doi: 10.1016/j.ijmecsci.2017.11.029 IF: 3.57

   -------------------------------------------------------------

A28-17. R. Seddik, A. Bahloul, A. Atig, R. Fathallah

"A simple methodology to optimize shot-peening process parameters using finite element simulations". International Journal of Advanced Manufacturing Technology 90 (2017) 2345-23  

IF: 2.601

   -------------------------------------------------------------

A29.2017-  R. Sarraj, T. Hassine and F. Gamoun                                                                                                     "Mechanical behavior of NiTi arc wires under pseudoelastic cycling and cathodically hydrogen charging" Materials Research Express (2017) IF: 1.151

   -------------------------------------------------------------

A30. M.A. Laribia, S. Tamboura, J. Fitoussia, R. Tié Bic, A. Tcharkhtchia, H. Ben Dalib

"Fast fatigue life prediction of short fiber reinforced composites using a new

hybrid damage approach: Application to SMC"

Composites Part B 139 (2018) 155–162

Available online 05 December 2017  IF: 4.92