Liste des articles 2016
A1.2016- Amani Lachiguer, Céline Bouby, Fehmi Gamaoun, Tarak Bouraoui and Tarak Ben Zineb
" Modeling of hydrogen effect on the superelastic behavior of Ni-Ti shape memory alloy wires"
Smart Materials and Structures, Volume 25, Numéro 11,
2016, Impact factor: 2,769
-------------------------------------------------------------
A2.2016- AH Chebbi, Y. Chouaibi, Z Affi and L Romdhane
" Sensitivity analysis and prediction of the orientation error of a three translational parallel manipulator"
Journal of Mechanical Engieering Science, DOI: 10.1177/09544406216675380, 2016, Impact factor: 0,730
-------------------------------------------------------------
A3.2016- Hend Ben Hadj Salah, Hachmi Ben Daly, Johanne Denault, Florence Perrin
“UV-degradation of clay reinforced polypropylene nanocomposites”, Polymer Engineering and Science, Volume 56,
Issue 4, pages 469–478, April 2016. Impact Factor: 1,449
-------------------------------------------------------------
A4.2016- H. Lamine, S. Bennour, L. Romdhane
" Design of cable-driven parallel manipulators for a specificworkspace using interval analysis”
Advanced Robotics, Volume30, Numéro 9
2016, Impact factor: 0,516
-------------------------------------------------------------
A5.2016- Mohamed Amine Ben Abdallah, ImedKhemili, NizarAifaoui
" Numerical investigation of a flexible slider–crank mechanism with multijoints with clearance"
Journal of Multibody Dynamics, Volume 38, Numéro 2
2016, Impact factor: 1,389
-------------------------------------------------------------
A6.2016- MortadhaGraa, Mohamed Nejlaoui1, AjmiHouidi, ZouhaierAffi, and LotfiRomdhane
" Mechatronic suspension design for full rail vehicle system"
Journal of Multibody Dynamics, DOI:10.1177/1464419316679298, 2016, Impact factor: 1,389
-------------------------------------------------------------
A7.2016- MortadhaGraa, Mohamed Nejlaoui, Ajmi Houidi, ZouhaierAffi, and Lotfi Romdhane
" Development of a reduced dynamic model for comfort evaluation of rail vehicle systems"
Journal of Multibody Dynamics, DOI: 10.1177/1464419315627914, 2016, Impact factor: 1,389
-------------------------------------------------------------
A8.2016- Mortadha Graa, Mohamed Nejlaoui1, Ajmi Houidi, Zouhaier Affi, and Lotfi Romdhane
" Mechatronic rail vehicle design based on the passenger comfort"
Journal of Engineering Science and Technology, Volume 9, Numéro 3, 2016, ISSN:1791-2377
Impact factor: SJR: 0.225
-------------------------------------------------------------
A9.2016- M. Mhalla et C. Bouraoui
" Experimental, analytical, and finite element study of stress concentration factors for composite materials"
Journal of composite materials, 2016, Impact factor: 1,242
-------------------------------------------------------------
A10.2016- W.Dandana, M.A. Yousfi, K.Hajlaoui, F. Gamaoun et A.R. Yavari
" Themal stability in hydrogen-induced softening in Zr57-Al10-Cu15.4-Ni12.6-Nb5"
Journal of Non-Crystalline Solids, 2016, Impact factor : 1,825
-------------------------------------------------------------
A11.2016- W. Elkhal Letaief, T. Hassine and F. Gamaoun
" Effect of Hydrogen on the Stress Relaxation of Aged NiTi Shape Memory Alloys"
Acta Physica Polonica A , Volume 129, Numéro4
2016, Impact factor: 0,43
-------------------------------------------------------------
A12.2016- Wissem Elkhal Letaief, Tarek Hassin, Fehmi Gamaoun
" Rate Dependency During Relaxation of Superelastic Orthodontic NiTi Alloys After Hydrogen Charging"
Shape Memory and Super elasticity, Volume 2, Numéro 1
2016, ISSN: 2199-384X (Print) 2199-3858 (Online
-------------------------------------------------------------
A13.2016- A. Bahloul & A. Ben Ahmed & M. M. Mhala & C. H. Bouraoui
"Probabilistic approach for predicting fatigue life improvement of cracked structure repaired by high interference fit bushing"
Int J Adv Manuf Technol DOI 10.1007/s00170-016-9957-6 Impact factor: 2.601
-------------------------------------------------------------
A14.2016- R.B.A. Ouled Ahmed, S. Chatti, H. Ben Daly
" Modeling of Hygrothermal Damage of Composite Materials"
Mechanics of Advanced Composite Structures 3 (2016) 137-144 Indexé
-------------------------------------------------------------
A15.2016- Hassine Wannes, a, Anouar Nasr, and Chokri Bouraoui,
"New fatigue limit assessment approach of defective material under fully reversed tension and torsion loading"
Mechanics & Industry 113, 310 (2016) c_AFM, EDP Sciences 2016 DOI: 10.1051/meca/2015064
-------------------------------------------------------------
A16.2016- A. Ben Ahmed & A. Nasr & R. Fathallah
"Probabilistic high cycle fatigue behavior prediction of A356-T6 alloy considering the SDAS dispersion"
Int J Adv Manuf Technol DOI 10.1007/s00170-016-9628-7
-------------------------------------------------------------
A17.2016- M.M. Mhalla*, A. Bahloul, Ch. Bouraoui
"Analytical models for predicting tensile strength and acoustic emission count of a glass fiber reinforced polyamide using response surface method"
Journal of Alloys and Compounds xxx (2016) 1-9
-------------------------------------------------------------
A18.2016- M.GRAA, M. Nejlaoui, A. Houidi, Z. Affi, L. Romdhane,
” Modeling and control of rail vehicle suspensions: A comparative study based on the passenger
comfort”, Proc IMechE Part C: J Mechanical Engineering Science, Vol. 232, 2: pp. 260-274 December 2016. IF=0.996