Détails

Création : 14 janvier 2019

Liste des communications 2018:

 

C1 - Abir Abdessalem, Sahbi Tamboura, Joseph Fitoussi, Hachmi Ben Daly, Abbas Tcharkhtchi

"Characterization of long-term viscoelastic behavior of polymeric composites".

20th International Conference in Composite Materials (ICCM à Paris France)

 -------------------------------------------------------------  

C2- Amani Eltaief, Borhen Louhichi, Sébestien Remy, Guillaume Ducellier, Benoit Eymard                                                                                                                           "A CAD Model relationship matrix generation and influence coefficient determination"

Proceedings of TMCE 2018, 7-11 May, 2018, Las Palmas de Gran Canaria, Spain Edited by: I. Horváth, J.P. Suárez Rivero and P.M. Hernández Castellano  Organizing Committee of TMCE 2018, ISBN 978-94-6186-910-4

 -------------------------------------------------------------  

C3- Ameni Eltaief, Borhen Louhichi, Sébastien Remy, Guillaumes Ducellier, Benoit Eynard,                                                                                                      "Engineering Changes within A CAD Model: Analysis and Impact Prediction "                                                                                                                                          Proccedings of CAD'18, 2018, 91-96DOI: 10.14733/cadconfP.2018.91-96 

-------------------------------------------------------------  

C4 - Amina Remadi, Ahmed Bahloul, Chokri Bouraoui

" Prediction of fatigue crack growth under spectrum loading"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

-------------------------------------------------------------   

C5 - Aroua Berriche, Jean-Yves Choley, Faida Mhenni, Abdelfattah Mlika

" Evaluation of the consistency between System Enginnering, Dynamic and Safety Modeling views of a Mechatronic System"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

-------------------------------------------------------------   

C6 - Aroau Fathallah, Tarek Hassine and Fehmi Gamaoun

" A simulation of an orthodontic correction using a super-elastic Ni-Ti wire"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

-------------------------------------------------------------   

C7-  Ahmed Fradi, Borhen Louhichi, Mohamed Ali Mahjoub, Benoit Eynard     

 "3D OBJECT RETRIEVAL IN HUGE CAD DATABASES: NEW SHAPE-BASED" Proceedings of TMCE2018, 7-11 May 2018

-------------------------------------------------------------   

C8-  Anis Korbi, Mehdi Tlija, Borhen Louhichi, Abdelmajid Ben Amara          

 " ACAD Model for Tolerence Analysis of non-rigid planar assemblies"   

28th CIRP Design Conference, May 2018, Nantes, France, Science Direct Procedia CIRP 70 (2018) 126-131

-------------------------------------------------------------   

C9-  Mehdi Tlija, Montasser Billah Letaief, Borhen Louhichi                    

"CAD Comparison Model for Data Reuse And Manufacturing Cost Estimation"                                                                                                                                                    28th CIRP Design Conference, May 2018, Nantes, France, Sience Direct Procedia CIRP 70 (2018) 59-65

-------------------------------------------------------------  

C10-  Boutheina Ben Fraj, Slim Zghal, Amen Gahbiche, Zoubeir Tourki

" The relation between R phase presence level and stress-temperature diagram of an aged NiTi shape Memory alloy"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

 -------------------------------------------------------------  

C11- C.Ammari, M.A.Yousfi, K. Hajlaoui, Z. Tourki

" Modeling of the wavy elastic response of metallic glass ribbon"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

 -------------------------------------------------------------  

C12 - Hanen El Golli, Ajmi Houidi, Abdelfattah Mlika, Safa Mechri

"Dynamic modeling of spherical parallel robot 3-URU"

International Conference on Mechanics and Energy

December 18-20, 2017, Sousse, TUNISIA

 -------------------------------------------------------------  

C13-  El Golli Hanèn, Houidi Ajmi, Mlika Abdelfattah

" Forward kinematic analysis of spherical parallel manipulator"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

 -------------------------------------------------------------  

C14-  Hajer Ben Amor, Sami Bennour, Houssein Lamine, Abdelbadia Chaker, Abdelfattah Mlika

"  Robot parallèle à huit câbles: Présentation et modélisation géométrique inverse"

 4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

-------------------------------------------------------------  

C15-  Hajer Troudi, Moncef Ghiss, Zoubeir Tourki, Mohamed Ellejmi

" Liquid-liquid binary mixture countercurrent flow in a structured packed-bed"

International Conference on Mechanics and Energy

December 18-20, 2017, Sousse, TUNISIA ICME'2017

 -------------------------------------------------------------  

C16-  Hajer Troudi, Moncef Ghiss, Mohamed Ellejmi, Zoubeir Tourki  

  "Pressure drop in one stage and two stages of packed columns"

The 9th Internationel Renewable Energy (IREC 2018)

 -------------------------------------------------------------  

C17- Hajer Troudi, Moncef Ghiss, Mohamed Ellejmi, Zoubeir Tourki

"Effect of porosity on the liquid flow distribution within two-stages of packed bed column"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15 Octobre, Tunisie

 -------------------------------------------------------------  

C18- Hanen Mahjoubi, Zoubeir Tourki, Fahmi Zairi

" Drawing-induced structural transformation in Poly(lactic acid)"

International Conference on Mechanics and Energy

December 18-20, 2017, Sousse, TUNISIA

-------------------------------------------------------------  

C19- Hadhani Ben slama, Raoudha Gaha

"Estimation de l'impact environnemental/cout en CAO pour l'éco-fabrication d'une pièce mécanique"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

 -------------------------------------------------------------  

C20- I. Ben Hamida, M. A. Laribi , A. Mlika , L. Romdhane, and S. Zeghloul

Geometric Based Approach for Workspace Analysis of Translational Parallel Robots

CISM International Centre for Mechanical Sciences 2019

1. Arakelian and P. Wenger (Eds.): ROMANSY 22 - Robot Design

Dynamics and Control, pp. 180–188, 2019. https://doi.org/10.1007/978-3-319-78963-7_24

-------------------------------------------------------------  

C21- Maroua Saggar, Chokri Bouraoui

"Improved fatigue damage accumulation and life time prediction of defective material subjected to block loading"

International Conference on Mechanics and Energy

December 18-20, 2017, Sousse, TUNISIA

 -------------------------------------------------------------  

C22-  Maroua Saggar, Anouar Nasr, Chokri Bouraoui                             

 " Probabilistic high cycle fatigue behavior prediction of C35 steel based on a useful equivalent wohler curve"                                

 International Conference on Mechanics and Energy

December18-20, 2017, Sousse, TUNISIA ICME'2017

-------------------------------------------------------------  

C23- Maroua Saggar, Anouar Nasr, Chokri Bouraoui                       

 "Improved approach for predicting lifetime of defective material subjected to block loading"

The second International Conference on Acoustics an Vibration, ICAV2018 Hammamet,

19-21 March 2018, Tunisia

-------------------------------------------------------------  

C24- Maroua Saggar, Anouar Nasr, Chokri Bouraoui

"Initiation life prediction method and modeling of the effects of parameters on the fatigue strength for defective materials"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

 -------------------------------------------------------------  

C25- Mohamed Ounaies, Manel Harchay, Fackhreddine Dammak, Hachmi Ben Daly

" Hygrothermal behavior of polyester/glass fiber composite in sea water"

International Conference on Mechanics and Energy

December 18-20, 2017, Sousse, TUNISIA

-------------------------------------------------------------  

C26- Mohamed Ounaies, Manel Harchay, Fakhreddine Dammak, Hachmi Ben Daly

"Humidity Velocity Effect on the Hygrothermal Behavior of the Polyester/Glass Fiber Composite"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

-------------------------------------------------------------  

C27- Mariem. Dakhli,  Atef. Boulila,  Zoubeir. Tourki, Pierre-Yves Manach                                                                                                                                                   " Effect of lubricants: Experimental investigation in SPIF process"

ICMAE 2018

-------------------------------------------------------------  

C28- Najeh Ben Guedria , Hichem Hassine                                                          

 "Efficient cultural algorithm for structural damage detection problem based on modal data"

The second  International Conference on Acoustics an Vibration, ICAV2018 Hammamet, 19-21 March 2018, Tunisia

 -------------------------------------------------------------  

C29- Olfa Jemaa, Sami Bennour, David Daney, Lotfi Romdhane

 "Enregistrement et modélisation du mouvement du membre supérieur humain à l'aide d'un capteur kinect"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

 -------------------------------------------------------------  

C30- Raja Ouled Ahmed Ben Ali, Sami Chatti                                  

 "Experimental, semi-analytical and numerical analysis for springback prediction of thick sandwich plate"

The second International Conference on Acoustics an Vibration, ICAV2018 Hammamet, 19-21 March 2018, Tunisia.

 -------------------------------------------------------------  

C31- Raja Ouled Ahmed Ben Ali, Sami Chatti                                      

 "Damage behaviors of sandwich materials under quasi-static three-point bending"

The second International Conference on Acoustics an Vibration, ICAV2018 Hammamet, 19-21 March 2018, Tunisia

-------------------------------------------------------------   

C32- Rihab Messadi Zougahi, Sana Abid, Tarek Hassine, Hachmi Ben Daly, Marie-France Lacrampe

" Strategy of Determination of Mechanical Properties of Woven flax-reinforced polypropylene Composite"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

-------------------------------------------------------------  

C33- Rihem Sarraj, Wissem El Khal Ltaief, Tarek Hassine and Fehmi Gamaoun

"Implementation of the performance degradation in a shape memory alloy during cyclic loading"

International Conference on Mechanics and Energy

December 18-20, 2017, Sousse, TUNISIA

-------------------------------------------------------------  

C34- Rihem Sarraj, Tarek Hassine and Fehmi Gamaoun                          

 "Modeling of cyclic loading effect on the mechanical behavior of NiTi arc wires"

The second International Conference on Acousti    cs an Vibration, ICAV2018 Hammamet, 19-21 March 2018, Tunisia

 -------------------------------------------------------------  

C35- Rihem Sarraj, Tarek Hassine and Fehmi Gamaoun

" Hydrogen embrittlement of superelastic NiTi arc wire during cyclic loading in oral cavity"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

 -------------------------------------------------------------  

C36- Samar Arfaoui, Farhat Zemzemi, Zoubeir Tourki                             

 "Effect  of cutting conditions on both dark and while layers thickness"

The second International Conference on Acoustics an Vibration, ICAV2018 Hammamet, 19-21 March 2018, Tunisia.

-------------------------------------------------------------   

C37- Arfaoui Samar, Zemzemi Farhat, Tourki Zoubeir                              

 "INFLUENCE OF CUTTING CONDITIONS ON WHITE LAYERS THICKNESS USING RESPONSE SURFACE METHOD"   Journal of Thermal Engineering

CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2017– ICAME2017

19-21 December 2017, Yildiz Technical University, Istanbul, Turkey

-------------------------------------------------------------  

C38- Sana Abid, Hedi Nour, Hachmi Ben Daly

" The effect of  printing direction of FDM technoloy

International Conference on Mechanics and Energy

December 18-20, 2017, Sousse, TUNISIA

-------------------------------------------------------------  

C39- Sana Abid,  Hedi Nouri, Tarek Hassine, Marie-France Lacrampe, Hachmi Ben Daly                                                                                                                  "Heterogeneous deformation in 3D printing of Acrylonitrile butadiene "styrene                                                                                                                                                 The second International Conference on Acoustics an Vibration, ICAV2018 Hammamet, 19-21 March 2018, Tunisia 

 -------------------------------------------------------------  

C40- Sana Abid, Rihab Messadi, Tarek Hassine, Hachemi Ben Daly, Marie France Lacrampe

"Anovel numerical approach to simulate 3D printing material"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15 Octobre  2018

 -------------------------------------------------------------  

C41- Baha Eddine Ezzine, Sami Bennour, Med Amine Laribi

" Développement et v alidation expérimentale d'un modèle biomécanique bio-inspiré du membre supérieure"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

 -------------------------------------------------------------  

C42- Wafa Dandana, Mohamed Abdelbasset Youssfi, Khalil Hajlaoui      

 " Effect of Hydrogen on the structural and mechanical properties of a ternary metallic glass"

International Conference on Mechanics and Energy

December 18-20, 2017, Sousse, TUNISIA  ICME'2017

 -------------------------------------------------------------  

C43- ZOUAGHI MESSADI, Rihab; NOURI, Hedi; HASSINE, Tarek; Prof. LACRAMPE, Marie-France; Prof. BEN DALY, Hachmi            

 "Creep testing of woven fabric flax-polypropylene

composite using digital correlation image (DIC)" ISMANAM 2018

 

 

 

 

 

 

 

Détails

Création : 14 janvier 2019

Lite des Communications 2017 C1. Ameni EL TAIEF, Borhen Louihichi "ACAD Assembly Management Model: Mates Reconciliation and change propagation" CMSM2017 Hammamet 27-29  Mars 2017, Tunisie -------------------------------------------------------------

C2. Ahmed BAHLOUL, Amel BEN AHMED, Chokri BOURAOUI. "An Engineering predictive approache of crack growth analysis of aircraft component" 7ème Congrès International Conception et Modélisation des Systèmes Mécanique CMSM'2017 Hammamet 27-29  Mars 2017, Tunisie -------------------------------------------------------------

C3. Aroua FATHALLAH, Tarek HASSINE, Fehmi GAMAOUN "In-situ hydrogen charging during tensile of niti alloyes: modeling and experimental characterization" 7th International Congress Design and Modelling of Mechanical Systems CMSM'2017 Hammamet 27-29  Mars 2017, Tunisia -------------------------------------------------------------

C4. Abir  BEN ABDALLAH, Achraf KALLEL, Fehmi GAMAOUN "Shape Memory Property and Driving Force of the shape Memory Blend (40%PCL/60%SBS)" 7th International Congress Design and Modelling of Mechanical Systems CMSM'2017 Hammamet 27-29  Mars 2017, Tunisia -------------------------------------------------------------

C5. Amina REMADI, Chokri BOURAOUI, Ahmed Bahloul "Analyse de l'effet de la dispersion des paramètres de la loi de propagation des fissures sur la fiabilité en tenant compte des contraintes résiduelles induites" 7th Congrès International Conception et Modélisation des Systèmes Mécanique CMSM'2017 -------------------------------------------------------------

C6. Asma KHOUAJA, Houssem AYARI, Sahbi TAMBOURA "Mise en place d'une méthodologie de calcul sur Matlab pour l'identification de la loi d'endommagement local en fatigue des composites SMC" 7ème Congrès International Conception et Modélisation des Systèmes Mécanique CMSM'2017 Hammamet 27-29 Mars 2017, Tunisie -------------------------------------------------------------

C7. Boutheina BEN FRAJ, Salim ZGHAL, Zoubeir TOURKI "On the NiTi SMA thermal behavior at various heat treatment conditions" -------------------------------------------------------------

C8. Boutheina BEN FRAJ, Salim ZGHAL, Zoubeir TOURKI "DSC investigation on entropy and enthalpy changes in Ni-rich NiTi shape memory alloy at various cooling/heating rates" CMSM2017 -------------------------------------------------------------

C9.Cheima  AMMARI, M. A. YOUSFI, K. HAJLAOUI, Z. TOURKI  "Novel electromechanical switch using wavy elastic response of metallic glass ribbons" 7ème Congrès International Conception et Modélisation des Systèmes Mécanique CMSM'2017 Hammamet 27-29 Mars 2017, Tunisie -------------------------------------------------------------

C10. E. EDERGUEL, S. BENNOUR, L. ROMDHANE "Biomechanical approach for the development and simulation of a musculoskeletal model of the ankle" -------------------------------------------------------------

C11. Hajer TROUDI, Moncef GHISS, Z. TOURKI, M. ELLEJMI "Numerical Investigation of Co-current Biphasic Flow Using an Euler- Lagrange Approach" 7ème Congrès International Conception et Modélisation des Systèmes Mécanique CMSM'2017 Hammamet 27-29- Mars 2017, Tunisie -------------------------------------------------------------

C12. Hanen EL GOLLI, Ajmi HOUIDI, Abdelfattah MLIKA "Dynamic modeling of spherical parallel manipulator 3RRR"   7ème Congrès International Conception et Modélisation des Systèmes Mécanique CMSM'2017 Hammamet 27-29  Mars 2017, Tunisie -------------------------------------------------------------

C13. Houssein LAMINE, Sami BENNOUR, Lotfi ROMDHANE "Dynamic Simultaion of a partial unloaded walking within the Cable Driven Legs Trainer using MATLAB SimMechanics" CMSM2017 -------------------------------------------------------------

C14. Ines BEN HAMIDA, Abdelfattah MLIKA, Med Amine LARIBI, Lotfi ROMDHANE "Synthèse dimensionnelle d'un translateur: Le Tri-pyramide" 7ème Congrès International Conception et Modélisation des Systèmes Mécanique CMSM'2017 -------------------------------------------------------------

C15. I. CHOUIK, A. BAHLOUL, C. BOURAOUI "Prise en compte de la dispersion des paramètres des lois de propagation des fissures" 7ème Congrès International Conception et Modélisation des Systèmes Mécanique CMSM'2017 Hammamet 27-29 Mars 2017, Tunisie -------------------------------------------------------------   C16. Mariem DAKHLI, A. BOULILA, Z. TOURKI "Etude  expérimentéle du formage incrémental des cones tronqués en acier doux"   7ème Congrès International Conception et Modélisation des Systèmes Mécanique CMSM'2017 Hammamet 27-29  Mars 2017, Tunisie -------------------------------------------------------------

C17. Mohamed OUNAIES, M. HARCHANY, F. DAMMAK , H. BEN DALY "Modélisation numérique du comportement hygrothermique du composite Polyester/fibre de verre"   7ème Congrès International Conception et Modélisation des Systèmes Mécanique CMSM'2017 Hammamet 27-29 Mars 2017, Tunisie -------------------------------------------------------------

C18. Maroua SAGGAR, Anouar NASR, Chokri BOURAOUI "Fatigue limit prediction for defective material"  7ème Congrès International Conception et Modélisation des Systèmes Mécanique CMSM'2017 Hammamet 27-29 Mars 2017, Tunisie -------------------------------------------------------------

C19. Mohamed Mhallah MAKKI, Ahmed BAHLOUL, Chokri BOURAOUI " Reliability prediction of stress concentration factor using response surface method" CMSM2017 -------------------------------------------------------------

C20- W. Hassine, A. Nasr, CH. Bouraoui   Fatigue limit assessment of a defective material under combined loading 7ième Congrès International Conception et Modélisation des Systèmes Mécaniques CMSM’2017, Hammamet 27-29 Mars 2017, Tunisie -------------------------------------------------------------

C21. Moncef GHISS, Zoubeir TOURKI, Olivier BOIRON "Caractérisation des propriétés mécanique du Disque Intervertébral lors d'un essai de relaxation en compression non confinée" 7ème Congrès International Conception et Modélisation des Systèmes Mécanique CMSM'2017 Hammamet 27-29 Mars 2017, Tunisie -------------------------------------------------------------

C22. Rihab MESSADI, Hedi NOURI, Hachmi BEN DALY, Marie-Frances LACROMPE "Optimisation de paramètre de fabrication d'un composite stratifié polypropylène-fibres de lin  obtenu par thermocompression" 7ème Congrès International Conception et Modélisation des Systèmes Mécanique CMSM'2017 Hammamet 27-29 Mars 2017, Tunisie -------------------------------------------------------------

C23. Rihem SARRAJ, Tarek HASSINE, Fehmi GAMAOUN "Mechanical properties and cyclic effect on the superelastic Ni-Ti arc wire" 7th International Congress Design and Modelling of Mechanical Systems CMSM'2017 Hammamet 27-29 Mars 2017, Tunisia -------------------------------------------------------------

C24. Samar ARFAOUI, Farhat ZEMZEMI, Zoubeir TOURKI "Modeling of phase transformations and residual stresses distribution in hard orthogonal cutting" 7ème Congrès International Conception et Modélisation des Systèmes Mécanique CMSM'2017 Hammamet 27-29 Mars 2017, Tunisie -------------------------------------------------------------

C25. Sana ABID,Hedi NOURI, Soufiane GUESSAMA, Marie-Frances LACROMPE, Hachmi BEN DALY  "Effet de l'angle d'impression sur le comportement mécanique de l'ABS imprimé" 7ème Congrès International Conception et Modélisation des Systèmes Mécanique CMSM'2017  Hammamet 27-29 Mars 2017, Tunisie -------------------------------------------------------------

C26. S. BENNOUR, H. LAMINE, B. URICH, T. LEGRAND, B .JOLLES, J. FAVRE and L. ROMDHANE. "Nouveau dispoditif expérimental pour la modification de la marche multi-paramètres"  7ème Congrès International Conception et Modélisation des Systèmes Mécanique CMSM'2017 Hammamet 27-29 Mars 2017, Tunisie -------------------------------------------------------------

C27. Wafa DANDANA, M.A YOUSFI, K. HAJLAOUI, A.R.YAVARI "Hydrogen-induced softening of Zr-based amorphous alloys" 7th International Congress Design and Modelling of Mechanical Systems CMSM'2017 Hammamet 27-29 Mars 2017, Tunisia -------------------------------------------------------------

C28. W. Dandana, K. Hajlaoui "Hydrogen-enhanced plasticity in Zr-based metallic glass"    24th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2017) -------------------------------------------------------------

C29. Wissem El KHAL LETAIEF, Tarek HASSINE, Fehmi GAMAOUN "Thermomechanical Model of Shape Memory Alloys Considering Strain rate dependency" 7th International Congress Design and Modelling of Mechanical Systems CMSM'2017 Hammamet 27-29 Mars 2017, Tunisia -------------------------------------------------------------

C30- W. ELKHAL LETAIEF, A. FATHALLAH, T. HASSINE  AND F. GAMAOUN  FINITE-ELEMENT ANALYSIS OF HYDROGEN EFFECT ON DEFLECTED ORTHODONTIC NITI WIRE  VIII ECCOMAS Thematic Conference on Smart Structures and Materials SMART 2017 A. Güemes, A. Benjeddou , J. Rodellar and Jinsong Leng (Eds) -------------------------------------------------------------

C31. Wissal MEHRI, K. HAJLAOUI, Z. TOURKI "Vers une modélisation extensible à un méta modèle du comportement des verres métalliques" 7ème Congrès International Conception et Modélisation des Systèmes Mécanique CMSM'2017 Hammamet 27-29 Mars 2017, Tunisie -------------------------------------------------------------

C32. Wifak Ben ABDELKHADER, Hend Ben Hadj SALAH, Hachmi BEN DALY "Kinetic analysis of the UV degradation on the surface of injection-model clay-reinforced polypropylene nanocomposites" 7ème Congrès International Conception et Modélisation des Systèmes Mécanique CMSM'2017 Hammamet 27-29 Mars 2017, Tunisie -------------------------------------------------------------

C33.  A. Jlassi, A. Chaker and A. Mlika  « 3-RRR Spheri cal optimisation du robot parallèleavec un minimum de 7 » IFToMM singularites Atelier international sur informatique Cinématique CK2017, Poitiers Futuroscope-, France, mai 22-24,2017 -------------------------------------------------------------

C34. Med Amine LARIBI, Abedlfattah Mlika, Lotfi ROMDHANE, Said ZEGHLOUL  « Optimisation robuste du RAF robot parallèle pour un espace de travail prescrit », 7 IFToMM Atelier international sur informatique Cinématique CK 2017, Poitiers Futuroscope-, France, mai 22-24,2017  -------------------------------------------------------------     C35. A Baklouti, JY Choley, F Mhenni, N Nguyen, A Mlika  « Amélioration de l' architecture système et le comportement en fonction des recommandations de AMDEC »27ème édition de la conférence internationale,européenne de la sécurité et de la Conférence Fiabilité ESREL 2017 , 18-22 Juin 2017, Partoroz, Slovénie. -------------------------------------------------------------

C36.  A Baklouti, JY Choley, F Mhenni, N Nguyen, Mlika   «libre et Open Source Fault Arbre Outils Analyse de l' enquête» 11e édition annuelle IEEE internationales    Systems Conference 2017 Syscon 2017, du 24 Avril au 27 Avril 2017, Montréal, Canada -------------------------------------------------------------

C37 .H. TROUDI, M. GHISS, Z.TOURKI, M. ELLEJMI " Hydrodynamic simulation of co-Current and Countercurrent of Column Distillation Using Euler Lagrange Approach" International Journal of Mechanical, Aerospace, Mechatronic and ManufacturingEnginnering Vol:11, No:1,2017 Journal électronique, Janvier 2017 -------------------------------------------------------------

C38. Ines Ben Hamida, Abdelfattaeh Mlika "Synthèse dimensionnelle du robot parallèle translateur: Tri-pyramide" RoMeCAD'2017 -  21Octobre 2017 -------------------------------------------------------------

C39. Hanen El Golli, Ajmi Houidi, Abdelfatteh Mlika "Dynamic modeling of spherical parallel manipulator close singular position" RoMeCAD'2017 - 21Octobre 2017 -------------------------------------------------------------

C40. Montasser Billah Letaief, Mehdi Tlija, Raoudha Gaha, Borhen Louhichi " CAD Model Comparison Approach Based On Unified Feature" RoMeCAD'2017 - 21Octobre 2017 -------------------------------------------------------------

C41. A.Eltaief, B. Louhichi, S. Remy "A CAD Assembly Management Model: Mates Reconciliation and Change Propagation RoMeCAD'2017 - 21Octobre 2017 -------------------------------------------------------------

C42. Anis Baklouti, A. Mlia & J.Y. Choley "Prise en compte de la sureté de fonctionnement lors du choix d'architectures des systèmes complexes (Techniques)" RoMeCAD'2017 - 21Octobre 2017 -------------------------------------------------------------

C43. Aroua Berriche, Abdelfattah Mlika, Jean-Yves Choley, Faida Mhenni "Contribution à l'analyse de cohérence des modèles système, multi-physique et sureté de fonctionnement" RoMeCAD'2017 - 21Octobre 2017

Hammamet (Tunisie), les 03,04 et 05 mai

 

Détails

Création : 14 janvier 2019

Liste des communications 2016

A1.2016- Amani Lachiguer, Céline Bouby, Fehmi Gamaoun, Tarak Bouraoui and Tarak Ben Zineb

" Modeling of hydrogen effect on the superelastic behavior of Ni-Ti shape memory alloy wires"

Smart Materials and Structures, Volume 25, Numéro 11,

 2016, Impact factor: 2,769

-------------------------------------------------------------  

A2.2016- AH Chebbi, Y. Chouaibi, Z Affi and L Romdhane

" Sensitivity analysis and prediction of the orientation error of a three translational parallel manipulator"

Journal of Mechanical Engieering Science, DOI: 10.1177/09544406216675380, 2016, Impact factor:  0,730

-------------------------------------------------------------  

A3.2016- Hend Ben Hadj Salah, Hachmi Ben Daly, Johanne Denault, Florence Perrin

“UV-degradation of clay reinforced polypropylene nanocomposites”, Polymer Engineering and Science, Volume 56, 

Issue 4, pages 469–478, April 2016. Impact Factor: 1,449

-------------------------------------------------------------  

A4.2016-  H. Lamine, S. Bennour, L. Romdhane 

" Design of cable-driven parallel manipulators for a specificworkspace using interval analysis”

Advanced Robotics, Volume30,  Numéro 9

2016, Impact factor: 0,516

-------------------------------------------------------------  

A5.2016- Mohamed Amine Ben Abdallah, ImedKhemili, NizarAifaoui

" Numerical investigation of a flexible slider–crank mechanism with multijoints with clearance"

Journal of Multibody Dynamics, Volume 38, Numéro 2

2016, Impact factor: 1,389

-------------------------------------------------------------  

A6.2016- MortadhaGraa, Mohamed Nejlaoui1, AjmiHouidi, ZouhaierAffi, and LotfiRomdhane

" Mechatronic suspension design for full rail vehicle system"

Journal of Multibody Dynamics, DOI:10.1177/1464419316679298, 2016,  Impact factor: 1,389

 ------------------------------------------------------------- 

A7.2016- MortadhaGraa, Mohamed Nejlaoui, AjmiHouidi, ZouhaierAffi, and LotfiRomdhane

" Development of a reduced dynamic model for comfort evaluation of rail vehicle systems"

Journal of Multibody Dynamics, DOI: 10.1177/1464419315627914, 2016, Impact factor: 1,389

 ------------------------------------------------------------- 

A8.2016- MortadhaGraa, Mohamed Nejlaoui1, AjmiHouidi, ZouhaierAffi, and LotfiRomdhane

" Mechatronic rail vehicle design based on the passenger comfort"

Journal of Engineering Science and Technology, Volume 9, Numéro 3, 2016, ISSN:1791-2377

-------------------------------------------------------------  

A9.2016- M. Mhalla et C. Bouraoui

" Experimental, analytical, and finite element study of stress concentration factors for composite materials"

Journal of composite materials, 2016, Impact factor:  1,242

-------------------------------------------------------------  

A10.2016- W.Dandana, M.A. Yousfi, K.Hajlaoui, F. Gamaoun et A.R. Yavari

" Themal stability in hydrogen-induced softening in Zr57-Al10-Cu15.4-Ni12.6-Nb5"

Journal of Non-Crystalline Solids, 2016,  Impact factor : 1,825

-------------------------------------------------------------  

A11.2016- W. Elkhal Letaief, T. Hassine and F. Gamaoun

" Effect of Hydrogen on the Stress Relaxation of Aged NiTi Shape Memory Alloys"

Acta Physica Polonica A , Volume 129,  Numéro4

2016, Impact factor: 0,43

-------------------------------------------------------------  

A12.2016- Wissem Elkhal Letaief,  Tarek Hassin, Fehmi Gamaoun

" Rate Dependency During Relaxation of Superelastic Orthodontic NiTi Alloys After Hydrogen Charging"

Shape Memory and Super elasticity, Volume 2, Numéro 1

2016, ISSN: 2199-384X (Print) 2199-3858 (Online)

-------------------------------------------------------------  

A13.2016- A. Bahloul & A. Ben Ahmed & M. M. Mhala & C. H. Bouraoui

"Probabilistic approach for predicting fatigue life improvement of cracked structure repaired by high interference fit bushing"

Int J Adv Manuf Technol DOI 10.1007/s00170-016-9957-6

 ------------------------------------------------------------- 

A14.2016-  R.B.A. Ouled Ahmed, S. Chatti, H. Ben Daly

" Modeling of Hygrothermal Damage of Composite Materials"

Mechanics of Advanced Composite Structures 3 (2016) 137-144

 ------------------------------------------------------------- 

A15.2016- Hassine Wannes1,a, Anouar Nasr1,2 and Chokri Bouraoui1,3

"New fatigue limit assessment approach of defective material under fully reversed tension and torsion loading"

Mechanics & Industry 113, 310 (2016) c_AFM, EDP Sciences 2016 DOI: 10.1051/meca/2015064

-------------------------------------------------------------  

A16.2016- A. Ben Ahmed & A. Nasr & R. Fathallah

"Probabilistic high cycle fatigue behavior prediction of A356-T6 alloy considering the SDAS dispersion"

Int J Adv Manuf Technol DOI 10.1007/s00170-016-9628-7

 ------------------------------------------------------------- 

A17.2016- M.M. Mhalla*, A. Bahloul, Ch. Bouraoui

"Analytical models for predicting tensile strength and acoustic emission count of a glass fiber reinforced polyamide using response surface method"

Journal of Alloys and Compounds xxx (2016) 1-9

 

 

 

Détails

Création : 14 janvier 2019

Liste des communications 2015

A1.2015- F.Zemzemi, A.Mkaddem, S.Mzali, S.Mezlini

"A3D multi-scratch test model for characterizing material removal regimes in 5083-Al alloy".

Materials and Design 87 (2015) 352-362

-------------------------------------------------------------  

A2.2015- M. Ghiss, B. Giannesini, P. Tropiano, Z. Tourki, and O. Boiron,

Quantitative MRI water content mapping of porcine intervertebral disc during uniaxial compression. Computer Methods in Biomechanics and Biomedical Engineering. September 2015. https://doi.org/10.1080/10255842.2015.1101072 (Impact factor: 1.974)

 ------------------------------------------------------------- 

A3.2015- S. Boukettaya, W.Al Siddique, A. Alawar, H. Ben Daly and A. Hammami,

 Cooling rate effects on the crystallization kinetics of Polypropylene/Date Palm Fiber

Composite materials, Science and Engineering of Composite Materials. ISSN (Online) 2191-0359, ISSN (Print) 0792-1233, DOI: 10.1515/secm-2014-0324, April 2015

-------------------------------------------------------------  

A4.2015 - S. Boukettaya, F. Almaskari, A. Abdala, A. Alawar, H. Ben Daly and A. Hammami,

 "Water absorption and Stress relaxation behavior of PP/Date Palm Fiber composite materials".

 Design and Modeling of Mechanical Systems II, Lecture Notes in Mechanical Engineering,   DOI: 10.1007/978-3-319-17527-0_44, pp 437-445, 20

 ------------------------------------------------------------- 

A5.2015- Souad Mbarek^,a,b Patrick Baronic and Laurence Noirezc* 

"Highlighting delayed elastic processes at zero stress in a polymer glass".

Delayed elastic processes in a polymer glass

Published online in Wiley Online Library: 15 June 2015

Polym Int 2015; 64: 1303–1308   © 2015 Society of Chemical Industry     

wileyonlinelibrary.com/journal/pi

 ------------------------------------------------------------- 

A6.2015- Iben Houria, M., Nadot, Y., Fathallah, R., Roy, M., & Maijer, D. M

 "Influence of casting defect and SDAS on the multiaxial fatigue behaviour of A356-T6 alloy including mean stress effect".

International Journal of Fatigue.May . (2015)

 

Détails

Création : 14 janvier 2019

Liste des communications 2014

A1.2014- A.Chaker, A. Mlika, M.A. Laribi, L. Romdhane, S. Zeghloul

"Accuracy Analysis of Non-Overconstrained Spherical Parallel Manipulators

European Journal of Mechanics A/Solids Numéro: 47 -2014

Impact Factor: 1.904

 ------------------------------------------------------------- 

A2.2014- S. Bennour, N. Zarrouk, M. Dogui, L. Romdhane & J. P. Merlet

"Validation of optimization model that estimates the musculotendinous forces during an isometric extension of knee"

 ------------------------------------------------------------- 

A3.2014- Boukattaya Sonia, Al Seddique Waseem, Alawar Ahmad, Ben Daly Hachmi, Hammami Adel

"Colling rate effects on the crystallization kinetics of Polypropylene/Date Palm Fiber Composite materials"

Science and Enginnering of Composite Materials  2014

Impact Factor: 0.593

 ------------------------------------------------------------- 

A4.2014- M. Ghisse, Glannesini, P. Tropiano, Z. Tourki, O. Boiron

"NMR imaging investigation of the incompressible poroelastic behavior of porcine intervertebral disk under external mechanical stress": Review Matériaux & Techniques, February 2014.(indexé scopus)

-------------------------------------------------------------  

A5.2014- F. Zemzemi , J. Rech, W. Ben Salem, A. Dogui, Ph. Kapsa

"Identification of priction and heat partition model at the tool-chip workpiece interfaces in dry cutting of an inconel 718 alloy with CBN and coated carbide tools"

ADVANCES IN MANUFACTURING SCIENCE AND TECHNOLOGY

Vol. 38, No. 1, 2014 DOI: 10.2478/amst-2014-0001

 

Détails

Création : 14 janvier 2019

Liste des communications 2013

A1.2013-  A. Chaker, A. MLIKA, M.A. Laribi, Romdhane Lotfi and S.Zeghoul,

" Clearance and manufacturing errors effects on the accuracy of the 3-RCC Spherical Parallel Manipulator "

European Journal of Mechanics - A/Solids, Volume 37, January–February 2013, Pages 86–95 (IF 1.592)

 ------------------------------------------------------------- 

A2.2013- M.A. Yousfi¹), K. Hajlaoui^1,2)† , Z. Tourki¹) and A.R. Yavari²)

 "Serrated Flow Model for Metallic Glasses under Compressive Loading".

Acta Metall. Sin. (Engl. Lett.) Vol.26 No. 5 pp. 503—508 October 2013 IF: 0.467

 ------------------------------------------------------------- 

A3.2013- S. Bennour, N. Zarrouk, M. Dogui, L. Romdhane, J-P. Merlet

 "Validation of optimization model that estimates the musculotendinous forces during an isometric extension of knee"

 Journal of Computer Methods in Biomechanics and Biomedical Engineering (Vol. 16, No. S1, August 2013, 167–179), Impact Factor: 1.770.

-------------------------------------------------------------  

A4.2013- Fehmi Gamaoun, Tarak Hassine & Tarak Bouraoui

"Strain rate response of a Ni–Ti shape memory alloy after hydrogen charging"

Philosophical Magazine Letters

Philosophical Magazine

Letters (2013): Strain rate response of a Ni–Ti shape memory alloy after hydrogen charging,

Philosophical Magazine Letters, DOI: 10.1080/09500839.2013.855330

Published online: 21 Nov 2013. IF: 1.3

-------------------------------------------------------------  

A5.2013- Fehmi Gamaoun, Imen Skhiri, Tarak Bouraoui, and Tarak Ben Zineb

"Hydrogen effect on the austenite–martensite transformation of the cycled Ni-Ti alloy"

Journal of Intelligent Material Systems and Structures 2014, Vol. 25(8) 980–988_ The Author(s) 2013

DOI: 10.1177/1045389X13502868 IF: 1.6

-------------------------------------------------------------  

A6.2013- Fehmi Gamaoun, Tarek Hassine

"Ageing Effect and Rate Dependency of a NiTi Shape Memory Alloy after Hydrogen

Charging"

Accepted Manuscript DOI: http://dx.doi.org/10.1016/j.jallcom.2013.10.214 IF: 2.390

------------------------------------------------------------- 

A7.2013- El-Kribi. B, Houidi.A, Affi.Z, Romdhane.L

"Application of multi-objective genetic algorithms to the mechatronic design of a four bar system with continuous and discrete varialbles"

Mechanism and Machine Theory 2013

IF: 1.214

------------------------------------------------------------- 

A8.2013H. Ben Hadj Salah, H. Ben Daly, J. Denault, F. Perrin,

“Morphological aspects of polypropylene/clay nanocomposites materials”, Polymer Engineering and Science, Volume 

53, Issue 5, pages 905–913, May 2013. Impact Factor: 1,441