Liste des articles 2017
A1-17. Wissem Elkhal LETAIEF, Tarek HASSINE & Fehmi GAMAOUN
"In situ stress relaxation mechanism of superelastic NiTi shape memory alloy under hydrogen charging". Philosophical magazine letters, 2017, DOI: 10.1080/09500839.2016 1273556 IF: 1.194
-------------------------------------------------------------
A2-17. Wissem Elkhal Letaief, Tarek Hassine & Fehmi Gamaoun
" Tensile behaviour of superelastic NiTi alloys charged withh ydrogen under applied strain"
Materials Science and Technology, DOI: 10.1080/02670836. 2017.1320084 IF: 1.803
-------------------------------------------------------------
A3-17. W. ElkhalLetaief, T. Hassine and F. Gamaoun
"A coupled model between hydrogen diffusion and mechanical behavior of superelastic NiTialloys” Smart Materials and structures, 26 (2017) 075001 (11pp) IF: 2.963
-------------------------------------------------------------
A4-17. Houssein LAMINE, Med Amine LARIBI, Sami BENNOUR, Lotfi ROMDHANE, Said ZEGHLOUL
" Design study of a cable -based Gait Training Machine". Journal of Bionic Enginnering 14 (2017) 232-244 IF: 2.325
-------------------------------------------------------------
A5-17. A. BAHLOUL, A. BEN AHMED, M.M. MHALA, C.H. BOURAOUI
"Probabilistic approach for predicting fatigue life improvement of cracked structure repaired by high interference fit bushing". Int J Adv Manuf TechnilDoi 10.1007/S00170-016-9957-62017
IF: 2.601
-------------------------------------------------------------
A6-17. A. Bahloul, CH. Bouraoui, T. Boukharouba
" Prediction of fatigue life by crack growth analysis" , International Journal of Advanced Manufacturing Technology 2017 IF: 2.601.
-------------------------------------------------------------
A7-17. Nasr, Y.Nadot, Ch. Bouraoui and R. Fathallah
"Fatigue life assessment for material containing defects under multiaxial loading"
Metallurgical Research & Technology EDP Sciences, 2016 Volume 114, Number 1, 2017 IF: 0.574
-------------------------------------------------------------
A8-17. Aymen Khadr Ajmi Houidi and Lotfi Romdhane
"Dynamic modelling and handling study of a two wheeled vehicle on a curved track"
Mechanics and Industry
Volume 18, Number 4, 2017 IF: 0.659
-------------------------------------------------------------
A9-17. Nasr, W. Hassine, Ch. Bouraoui
"Fatigue limit assessment for defective materials based on affected depth "
Mettal. Res. Technol. Vol, No (2017) DOI: 0.1051/ métal /2017045 IF: 0574
-------------------------------------------------------------
A10-17. Mariem Dakhli & Atef Boulila & Zoubeir Tourki
"Effect of generatrix profile on single-point incremental forming parameters"
Int J Adv Manuf Technol DOI 10.1007/s00170-017-0598-1 IF: 2.6
-------------------------------------------------------------
A11-17. Mohamed Abdelbasset Yousfi, Cheima Ammari, Khalil Hajlaoui, Nikolaos T. Panagiotopoulos, Zoubeir Tourki
" On a new electromechanical switch using the reversible wavy elastic response of metallic glass ribbons ". Comptes Rendus Mécanique, CRMECANIQUE-D-17-00092R1 IF: 1.127
-------------------------------------------------------------
A12-17. M.A. Yousfi, N.T. Panagiotopoulos , A.M. Jorge Junior, K. Georgarakis, A.R. Yavari
"Novel micro-flat springs using the superior elastic properties of metallic glass foils"
Scripta Materialia 131 (2017) 84–88 DOI: 10.1016/j.scriptamat.2017.01.012 IF: 4.163
-------------------------------------------------------------
A13-17. S. Arfaoui, F. Zemzemi & Z. Tourki
"Relationship between cutting process parameters and white layer thickness in orthogonal cutting"
DOI: 10.1080/10426914.2017.1364849 On ligne: 18 August 2017 IF: 2.669
-------------------------------------------------------------
A14-17. Mhalla Mohamed Makki, Bahloul Ahmed, Bouraoui Chokri
"Reliability prediction of the stress concentration factor using response surface method"
Int J Adv Manuf Technol DOI 10.1007/s00170-017-0910-0 IF: 2.601
-------------------------------------------------------------
A15-17. Maroua Saggar, Haifa Sallem, Chokri Bouraoui
"Fatigue life prediction under variable loading based on a new damage model devoted for defective material"
Int J Adv Manuf Technol https://doi.org/10.1007/s00170-017-1198-9 IF: 2.601
-------------------------------------------------------------
A16-17. Sami Bennour, Baptiste Ulrich, Thomas, Legrand, Brigitte M.Julien Favre
"A Gait Retraining System using Augmented-Reality to Modify Footprint Parameters: Effects on Lower-Limb Sagittal-Plane Kinematics"
Journal of Biomécanique, Octobre 2017 IF: 2.431.
-------------------------------------------------------------
A17-17. S. Bennour, B.Ulrich, T. Legrand, B.Jolles, J. Favre
"Effets of foot progression angle on knee biomechanics during gait modification"
Journal des méthodes informatiques en Biomécanique et génie biomédical, Vol. 20, No. S1, Octobre 2017 IF: 1.974
-------------------------------------------------------------
A18-17. H. Lamine, S. Bennour, MA Laribi, L. Romdhane, S. Zeghloul
"Evaluation of Calibrated Kinect Gait Kinematics Using a Vicon Motion Capture System"
Computer Methods in Biomechanics and Biomedical Engineering, Vol.20, No. S1, October 2017 IF: 1.974
-------------------------------------------------------------
A19-17. Shirinbayan M, Fitoussi J, Meraghni F, Surowiec B, Laribi M.A, Tcharkhtchi A.
"Coupled effect of loading frequency and amplitude on the fatigue behavior of advanced sheet molding compound (A-SMC)", Journal of Reintforced Plastics and Composites; 36(4): 271-282 (2017), IF: 1.471
-------------------------------------------------------------
A20-17. Meftah, H., Tamboura, S., Fitoussi, J
"Characterization of a New Fully Recycled Carbon Fiber Reinforced Composite Subjected to High Strain Rate Tension". Journal of applied composites materials, https: //doi.org/10.1007/s10443-017-9632-6 (2017), IF: 1.333
-------------------------------------------------------------
A21-17. A. Bahloul, A. Ben Ahmed, CH. Bouraoui
"Probabilistic fatigue crack growth assessment of A1 7075-T6 aerospace component. Structural Integrity Procedia 5 (2017) 430-437. Indexé
-------------------------------------------------------------
A22-17. A. Bahloul, A. Ben Ahmed, M.M. Mhallah, CH. Bouraoui
"An Engineering Predictive Approach of fatigue crack growth behavior: case of the Lug-Type Joint". Comptes Rendus-Mécanique 2017 IF: 1.127.
-------------------------------------------------------------
A23-17. Hajloui, K., Alsaleh, N., Alrasheedi, N.H., Yavari, A.R.
" Coalescence and subsequent twinning of nanocrystals during deformation of CuZr-based metallic glasses: The grain size effects, Journal of Non-Crystalline Solids 464, pp.39-43 (2017) IF: 2.488
-------------------------------------------------------------
A24-17. Jbira, M. Tlija, B. Louhichi, A. Tahan,
"CAD/Tolerancing Integration :Mechanical Assembly with form defects, Advances in Enginnering Software 2017, (https://doi.org/10/1016/j.advengsoft.2017.07.010) IF: 3.198
-------------------------------------------------------------
A25-17. B. BEN FRAJ, A. GAHBICHE, S. ZGHAL and Z. TOURKI
" On the influence of the heat treatment temperature on the superelastic compressive behavior of the Ni rchi Niti shape memory alloy", Journal of Materials Engineering and Performance. (Septembre 2017). DOI: 10.1007/s11665-017-2974-2 JMEP-17-02-12461.R. IF: 1.34
-------------------------------------------------------------
A26-17. Rihab GRISSA, Farhat ZEMZEMI, Raoudha SEDDIK, Raouf Fathallah,
"A Numerical-Analytical Approach to Predict High Cycle Fatigue Performance of Finish Machined AISI 316 L Steel". International Journal of Advanced Manufacturing Technology (2017) in press IF: 2.601.
-------------------------------------------------------------
A27-17. R. Grissa, F. Zemzemi, R. Fathallah
" Three approaches for modeling residual stresses induced by orthogonal cutting of AISI316L". International journal of Mechanical Sciences (2017), Doi: 10.1016/j.ijmecsci.2017.11.029 IF: 3.57
-------------------------------------------------------------
A28-17. R. Seddik, A. Bahloul, A. Atig, R. Fathallah
"A simple methodology to optimize shot-peening process parameters using finite element simulations". International Journal of Advanced Manufacturing Technology 90 (2017) 2345-23
IF: 2.601
-------------------------------------------------------------
A29.2017- R. Sarraj, T. Hassine and F. Gamoun "Mechanical behavior of NiTi arc wires under pseudoelastic cycling and cathodically hydrogen charging" Materials Research Express (2017) IF: 1.151
-------------------------------------------------------------
A30. M.A. Laribia, S. Tamboura, J. Fitoussia, R. Tié Bic, A. Tcharkhtchia, H. Ben Dalib
"Fast fatigue life prediction of short fiber reinforced composites using a new
hybrid damage approach: Application to SMC"
Composites Part B 139 (2018) 155–162
Available online 05 December 2017 IF: 4.92