Statistics
banner
  • Register

Liste des communications 2018:

 

C1 - Abir Abdessalem, Sahbi Tamboura, Joseph Fitoussi, Hachmi Ben Daly, Abbas Tcharkhtchi

"Characterization of long-term viscoelastic behavior of polymeric composites".

20th International Conference in Composite Materials (ICCM à Paris France)

 -------------------------------------------------------------  

C2- Amani Eltaief, Borhen Louhichi, Sébestien Remy, Guillaume Ducellier, Benoit Eymard                                                                                                                           "A CAD Model relationship matrix generation and influence coefficient determination"

Proceedings of TMCE 2018, 7-11 May, 2018, Las Palmas de Gran Canaria, Spain Edited by: I. Horváth, J.P. Suárez Rivero and P.M. Hernández Castellano  Organizing Committee of TMCE 2018, ISBN 978-94-6186-910-4

 -------------------------------------------------------------  

C3- Ameni Eltaief, Borhen Louhichi, Sébastien Remy, Guillaumes Ducellier, Benoit Eynard,                                                                                                      "Engineering Changes within A CAD Model: Analysis and Impact Prediction "                                                                                                                                          Proccedings of CAD'18, 2018, 91-96DOI: 10.14733/cadconfP.2018.91-96 

-------------------------------------------------------------  

C4 - Amina Remadi, Ahmed Bahloul, Chokri Bouraoui

" Prediction of fatigue crack growth under spectrum loading"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

-------------------------------------------------------------   

C5 - Aroua Berriche, Jean-Yves Choley, Faida Mhenni, Abdelfattah Mlika

" Evaluation of the consistency between System Enginnering, Dynamic and Safety Modeling views of a Mechatronic System"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

-------------------------------------------------------------   

C6 - Aroau Fathallah, Tarek Hassine and Fehmi Gamaoun

" A simulation of an orthodontic correction using a super-elastic Ni-Ti wire"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

-------------------------------------------------------------   

C7-  Ahmed Fradi, Borhen Louhichi, Mohamed Ali Mahjoub, Benoit Eynard     

 "3D OBJECT RETRIEVAL IN HUGE CAD DATABASES: NEW SHAPE-BASED" Proceedings of TMCE2018, 7-11 May 2018

-------------------------------------------------------------   

C8-  Anis Korbi, Mehdi Tlija, Borhen Louhichi, Abdelmajid Ben Amara          

 " ACAD Model for Tolerence Analysis of non-rigid planar assemblies"   

28th CIRP Design Conference, May 2018, Nantes, France, Science Direct Procedia CIRP 70 (2018) 126-131

-------------------------------------------------------------   

C9-  Mehdi Tlija, Montasser Billah Letaief, Borhen Louhichi                    

"CAD Comparison Model for Data Reuse And Manufacturing Cost Estimation"                                                                                                                                                    28th CIRP Design Conference, May 2018, Nantes, France, Sience Direct Procedia CIRP 70 (2018) 59-65

-------------------------------------------------------------  

C10-  Boutheina Ben Fraj, Slim Zghal, Amen Gahbiche, Zoubeir Tourki

" The relation between R phase presence level and stress-temperature diagram of an aged NiTi shape Memory alloy"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

 -------------------------------------------------------------  

C11- C.Ammari, M.A.Yousfi, K. Hajlaoui, Z. Tourki

" Modeling of the wavy elastic response of metallic glass ribbon"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

 -------------------------------------------------------------  

C12 - Hanen El Golli, Ajmi Houidi, Abdelfattah Mlika, Safa Mechri

"Dynamic modeling of spherical parallel robot 3-URU"

International Conference on Mechanics and Energy

December 18-20, 2017, Sousse, TUNISIA

 -------------------------------------------------------------  

C13-  El Golli Hanèn, Houidi Ajmi, Mlika Abdelfattah

" Forward kinematic analysis of spherical parallel manipulator"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

 -------------------------------------------------------------  

C14-  Hajer Ben Amor, Sami Bennour, Houssein Lamine, Abdelbadia Chaker, Abdelfattah Mlika

"  Robot parallèle à huit câbles: Présentation et modélisation géométrique inverse"

 4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

-------------------------------------------------------------  

C15-  Hajer Troudi, Moncef Ghiss, Zoubeir Tourki, Mohamed Ellejmi

" Liquid-liquid binary mixture countercurrent flow in a structured packed-bed"

International Conference on Mechanics and Energy

December 18-20, 2017, Sousse, TUNISIA ICME'2017

 -------------------------------------------------------------  

C16-  Hajer Troudi, Moncef Ghiss, Mohamed Ellejmi, Zoubeir Tourki  

  "Pressure drop in one stage and two stages of packed columns"

The 9th Internationel Renewable Energy (IREC 2018)

 -------------------------------------------------------------  

C17- Hajer Troudi, Moncef Ghiss, Mohamed Ellejmi, Zoubeir Tourki

"Effect of porosity on the liquid flow distribution within two-stages of packed bed column"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15 Octobre, Tunisie

 -------------------------------------------------------------  

C18- Hanen Mahjoubi, Zoubeir Tourki, Fahmi Zairi

" Drawing-induced structural transformation in Poly(lactic acid)"

International Conference on Mechanics and Energy

December 18-20, 2017, Sousse, TUNISIA

-------------------------------------------------------------  

C19- Hadhani Ben slama, Raoudha Gaha

"Estimation de l'impact environnemental/cout en CAO pour l'éco-fabrication d'une pièce mécanique"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

 -------------------------------------------------------------  

C20- I. Ben Hamida, M. A. Laribi , A. Mlika , L. Romdhane, and S. Zeghloul

Geometric Based Approach for Workspace Analysis of Translational Parallel Robots

CISM International Centre for Mechanical Sciences 2019

  1. Arakelian and P. Wenger (Eds.): ROMANSY 22 - Robot Design

Dynamics and Control, pp. 180–188, 2019. https://doi.org/10.1007/978-3-319-78963-7_24

-------------------------------------------------------------  

C21- Maroua Saggar, Chokri Bouraoui

"Improved fatigue damage accumulation and life time prediction of defective material subjected to block loading"

International Conference on Mechanics and Energy

December 18-20, 2017, Sousse, TUNISIA

 -------------------------------------------------------------  

C22-  Maroua Saggar, Anouar Nasr, Chokri Bouraoui                             

 " Probabilistic high cycle fatigue behavior prediction of C35 steel based on a useful equivalent wohler curve"                                

 International Conference on Mechanics and Energy

December18-20, 2017, Sousse, TUNISIA ICME'2017

-------------------------------------------------------------  

C23- Maroua Saggar, Anouar Nasr, Chokri Bouraoui                       

 "Improved approach for predicting lifetime of defective material subjected to block loading"

The second International Conference on Acoustics an Vibration, ICAV2018 Hammamet,

19-21 March 2018, Tunisia

-------------------------------------------------------------  

C24- Maroua Saggar, Anouar Nasr, Chokri Bouraoui

"Initiation life prediction method and modeling of the effects of parameters on the fatigue strength for defective materials"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

 -------------------------------------------------------------  

C25- Mohamed Ounaies, Manel Harchay, Fackhreddine Dammak, Hachmi Ben Daly

" Hygrothermal behavior of polyester/glass fiber composite in sea water"

International Conference on Mechanics and Energy

December 18-20, 2017, Sousse, TUNISIA

-------------------------------------------------------------  

C26- Mohamed Ounaies, Manel Harchay, Fakhreddine Dammak, Hachmi Ben Daly

"Humidity Velocity Effect on the Hygrothermal Behavior of the Polyester/Glass Fiber Composite"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

-------------------------------------------------------------  

C27- Mariem. Dakhli,  Atef. Boulila,  Zoubeir. Tourki, Pierre-Yves Manach                                                                                                                                                   " Effect of lubricants: Experimental investigation in SPIF process"

ICMAE 2018

-------------------------------------------------------------  

C28- Najeh Ben Guedria , Hichem Hassine                                                          

 "Efficient cultural algorithm for structural damage detection problem based on modal data"

The second  International Conference on Acoustics an Vibration, ICAV2018 Hammamet, 19-21 March 2018, Tunisia

 -------------------------------------------------------------  

C29- Olfa Jemaa, Sami Bennour, David Daney, Lotfi Romdhane

 "Enregistrement et modélisation du mouvement du membre supérieur humain à l'aide d'un capteur kinect"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

 -------------------------------------------------------------  

C30- Raja Ouled Ahmed Ben Ali, Sami Chatti                                  

 "Experimental, semi-analytical and numerical analysis for springback prediction of thick sandwich plate"

The second International Conference on Acoustics an Vibration, ICAV2018 Hammamet, 19-21 March 2018, Tunisia.

 -------------------------------------------------------------  

C31- Raja Ouled Ahmed Ben Ali, Sami Chatti                                      

 "Damage behaviors of sandwich materials under quasi-static three-point bending"

The second International Conference on Acoustics an Vibration, ICAV2018 Hammamet, 19-21 March 2018, Tunisia

-------------------------------------------------------------   

C32- Rihab Messadi Zougahi, Sana Abid, Tarek Hassine, Hachmi Ben Daly, Marie-France Lacrampe

" Strategy of Determination of Mechanical Properties of Woven flax-reinforced polypropylene Composite"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

-------------------------------------------------------------  

C33- Rihem Sarraj, Wissem El Khal Ltaief, Tarek Hassine and Fehmi Gamaoun

"Implementation of the performance degradation in a shape memory alloy during cyclic loading"

International Conference on Mechanics and Energy

December 18-20, 2017, Sousse, TUNISIA

-------------------------------------------------------------  

C34- Rihem Sarraj, Tarek Hassine and Fehmi Gamaoun                          

 "Modeling of cyclic loading effect on the mechanical behavior of NiTi arc wires"

The second International Conference on Acousti    cs an Vibration, ICAV2018 Hammamet, 19-21 March 2018, Tunisia

 -------------------------------------------------------------  

C35- Rihem Sarraj, Tarek Hassine and Fehmi Gamaoun

" Hydrogen embrittlement of superelastic NiTi arc wire during cyclic loading in oral cavity"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

 -------------------------------------------------------------  

C36- Samar Arfaoui, Farhat Zemzemi, Zoubeir Tourki                             

 "Effect  of cutting conditions on both dark and while layers thickness"

The second International Conference on Acoustics an Vibration, ICAV2018 Hammamet, 19-21 March 2018, Tunisia.

-------------------------------------------------------------   

C37- Arfaoui Samar, Zemzemi Farhat, Tourki Zoubeir                              

 "INFLUENCE OF CUTTING CONDITIONS ON WHITE LAYERS THICKNESS USING RESPONSE SURFACE METHOD"   Journal of Thermal Engineering

CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2017– ICAME2017

19-21 December 2017, Yildiz Technical University, Istanbul, Turkey

-------------------------------------------------------------  

C38- Sana Abid, Hedi Nour, Hachmi Ben Daly

" The effect of  printing direction of FDM technoloy

International Conference on Mechanics and Energy

December 18-20, 2017, Sousse, TUNISIA

-------------------------------------------------------------  

C39- Sana Abid,  Hedi Nouri, Tarek Hassine, Marie-France Lacrampe, Hachmi Ben Daly                                                                                                                  "Heterogeneous deformation in 3D printing of Acrylonitrile butadiene "styrene                                                                                                                                                 The second International Conference on Acoustics an Vibration, ICAV2018 Hammamet, 19-21 March 2018, Tunisia 

 -------------------------------------------------------------  

C40- Sana Abid, Rihab Messadi, Tarek Hassine, Hachemi Ben Daly, Marie France Lacrampe

"Anovel numerical approach to simulate 3D printing material"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15 Octobre  2018

 -------------------------------------------------------------  

C41- Baha Eddine Ezzine, Sami Bennour, Med Amine Laribi

" Développement et v alidation expérimentale d'un modèle biomécanique bio-inspiré du membre supérieure"

4ème Congrès Tunisien de Mécanique COTUME'2018

Hammamet 13-15Octobre, Tunisie

 -------------------------------------------------------------  

C42- Wafa Dandana, Mohamed Abdelbasset Youssfi, Khalil Hajlaoui      

 " Effect of Hydrogen on the structural and mechanical properties of a ternary metallic glass"

International Conference on Mechanics and Energy

December 18-20, 2017, Sousse, TUNISIA  ICME'2017

 -------------------------------------------------------------  

C43- ZOUAGHI MESSADI, Rihab; NOURI, Hedi; HASSINE, Tarek; Prof. LACRAMPE, Marie-France; Prof. BEN DALY, Hachmi            

 "Creep testing of woven fabric flax-polypropylene

composite using digital correlation image (DIC)" ISMANAM 2018