Articles
banner
  • inscription

Liste des articles 2018:

A1.2018-  A. Eltaief, B. Louhichi, S. Remy                                                                                                              "Associations Management and Change Propagation in the CAD Assembly, accepté à Computers in Industry 2018. IF: 2.85      

------------------------------------------------------------- 

A2.2018- Maroua Saggar & Chokri Bouraoui & Anouar Nasr                                                                                                  " Fatigue reliability prediction of defective materials based on a useful equivalent Wöhler curve".The International Journal of Advanced Manufacturing Technology

https://doi.org/10.1007/s00170-018-1975-0, Paru en ligne: 17 April 2018   IF: 2.601

-------------------------------------------------------------                                                                                                                                         

A3.2018- Anouar Nasr & Wannes Hassine & Maroua Saggar & Chokri Bouraoui                                                          "High cycle fatigue approach based on affected depth and considering the secondary dendrite arming spacing (SDAS) effect for a defectiveA356-T6 alloy"

The International Journal of Advanced Manufacturing Technology

https://doi.org/10.1007/s00170-018-2396-9  En ligne: 15 July 2018  IF: 2.601

 ------------------------------------------------------------- 

A4.2018- P. Zuoa, R.C. Benevidesb , M.A. Laribia , J. Fitoussia , M. Shirinbayana , F. Bakirc , A. Tcharkhtchi                                                                                                                                                                        "Multi-scale analysis of the effect of loading conditions on monotonic and fatigue behavior of a glass fiber reinforced polyphenylene sulfide (PPS)composite"  

Composites Part B 145 (2018) 173–181  Available online: 17 March 2018  IF: 4.92

 ------------------------------------------------------------- 

A5.2018- Mohamed Ounaies, Manel Harchay, Fachkreddine Dammak and Hachmi Ben Daly                                               "Prediction of hygrothermal behavior of polyester/glass fiber composite in dissymmetric absorption"  Journal of Composite Materials  Journal of Composite Materials 0(0) 1-7 DOI: 10.1177/0031998318773458  (2018)

 IF: 1.613

 ------------------------------------------------------------- 

A6.2018- S. Arfaoui & F. Zemzemi & Z. Tourki                                                                                        

 "A numerical-analytical approach to predict white and dark layer thickness of hard machining"                                                         The International Journal of Advanced Manufacturing Technology

https://doi.org/10.1007/s00170-018-1831-2  / 05 March 2018    IF: 2.601                  

 ------------------------------------------------------------- 

A7.2018-    W.Dandana, K.Hajlaoui                                                                                                                                   "Effect of hydrogen addition on the mechanical properties of Zr-based metallic glass  Journal of Alloys and Compounds"

Volume 742, 25 April 2018    IF= 3,779

https://doi.org/10.1016/j.jallcom.2018.01.369       

 ------------------------------------------------------------- 

A8.2018-   Wissem Elkhal Letaief, Aroua Fathallah, Tarek Hassine, Fehmi Gamaoun                                                                                                   "Finite element analysis of hydrogen effects on superelastic NiTi shape memory alloys: Orthodontic application". 

 DOI: 10.1177 / 1045389X18754356   (2018)  Journal of Intelligent Material Systems and Structures  01/02/2018    IF: 2.211

 ------------------------------------------------------------- 

A9.2018-  Ahmed Bahloul , Mohamed Maki Mhalla, CHokri Bouraoui                                                                           "Crack repair of SENT specimen using the interference fit process"

 Journal of Alloys and Compounds 748 (2018) 363e374   IF: 3.779

-------------------------------------------------------------   

A10.2018-  Mohamed Makki Mhalla, Ahmed Bahloul and Chokri Bouraoui

"Probability prediction of tensile strength with acoustic emission count of a glass fiber reinforced polyamide"

Mechanics & Industry 19, 110 (2018) Volume 19,  Number1, 2018, Number of page(s) 9,

 DOI: /doi.org/10.1051/meca/2018012, Published online: 31 August 2018 IF: 0.659

 ------------------------------------------------------------- 

A11.2018-   A. Korbi & M. Tlija & B. Louhichi & A. BenAmara                                                                        "CAD/tolerancing integration: a new approach for tolerance analysis of non-rigid parts assemblies"                                                    The International Journal of Advanced Manufacturing Technology

https://doi.org/10.1007/s00170-018-2347-5 en ligne: 28 June 2018    IF: 2.601               

            

 ------------------------------------------------------------- 

A12.2018- Imed KHEMILI, Mohamed Amine BEN ABDALLAH, Nizar AIFAOUI,

"Multi-objective optimization of a flexible slider-crank mechanism synthesis, based on dynamic responses" Journal of Engineering Optimization,  DOI: 10.1080/0305215X.2018.1508574  (2018) IF: 1.622.        

 ------------------------------------------------------------- 

A13.2018-   Grissa, R., Zemzemi, F., Fathallah, R.                                                                      

 "Efficient constitutive material model for predicting residual stresses induced by orthogonal cutting"   Journal of Mechanical Science and Technology 32(6), pp. 2765-2771 (2018) IF: 3.57 

 ------------------------------------------------------------- 

A14.2018- Sbayti, M., Bahloul, R., BelH adj Salah, H., Zemzemi, F.                                                                   "Optimization techniques applied to single point incremental forming process for biomedical application"                                           International Journal of Advanced Manufacturing Technology

95(5-8), pp. 1789-1804 (2018)   IF: 2.601 

-------------------------------------------------------------  

A15.2018- Elwasli, F., Mzali, S., Zemzemi, F., Mkaddem, A., Mezlini, S.                                                                     "Effects of initial surface topography and contact regimes on tribological behavior of AISI-52100/AA5083 materials’ pair when reciprocating sliding"      International Journal of Mechanical Sciences 137, pp. 271-283 (2018)  IF: 3.57

-------------------------------------------------------------  

A16.2018-  Houssem Saafi, Med Amine Laribi, Said Zeghloul, Marc Arsicault                                                                   "On the Development of a New Master Device Used for Medical Tasks"  ASME. Journal of Mechanisms and Robotics. 2018; 10 (4): 044501-044501-6. doi: 10,1115 / 1,4039590.  (IF: 2,371).

 ------------------------------------------------------------- 

A17-2018. Célestin Préault, Houssem Saafi, Med Amine Laribi, and Said Zeghloul

"Optimal design and evaluation of a dexterous 4 DoFs haptic device based on delta architecture "

Robotica: page 1 of 22. © Cambridge University Press 2018 doi:10.1017/S0263574718000929 IF: 1.117

 ------------------------------------------------------------- 

A18.2018-  Souad Mbarek · Nadia El Kissi · Zaineb Baccouch · Cristina Iojoiu                                                          "Extrusion of Nafion and Aquivion membranes:environmentally friendly procedure and good conductivities" Polymer Bulletin,  July 2018  https://doi.org/10.1007/s00289-018-2427-6  IF: 1.589

 ------------------------------------------------------------- 

A19.2018- K. Souaissa, M. Ghiss, M. Chrigui, H. Bentaher, and A. Maalej                        

 " A comprehensive analysis of aerodynamic flow around H-Darrieus rotor with camber-bladed profile"  Wind Engineering, August  2018. https://doi.org/10.1177/0309524X18791390 (SJR 0.294) 

 ------------------------------------------------------------- 

A20.2018- M. A. Chetoui, O. Boiron, M. Ghiss, A. Dogui, and V. Deplano

Assessment of intervertebral disc degeneration-related properties using finite element models based on ρH−weighted MRI data" Biomech Model Mechanobiol. August 2018 doi:10.1007/s10237-018-10641

 IF: 3.212

 -------------------------------------------------------------  

A21.2018- Sonia Boukettaya, Ahmad Alawar, Fahad Almaskari , Hachmi Ben Daly , Ahmed Abdala  and Sami Chatti                                                                                             

 "Modeling of water diffusion mechanism in polypropylene/date palm fiber composite materials"

Journal of Composite Materials 0(0) 1–9

The Author(s) 2018  DOI: 10.1177/0021998317752228  IF: 1.613

 ------------------------------------------------------------- 

A22.2018- S. Tamboura, H. Meftah ,  J. Fitoussi, H. BenDaly,  A. Tcharkhtchi                

"Thermal aging kinetic and effects on mechanical behavior of fully recycled composite based on polypropylene/polyethylene blend"                          

  1. APPL. POLYM. SCI. 2018, DOI: 10.1002/APP.46640 IF: 1.901

 ------------------------------------------------------------- 

23.2018- Rihab Messadi, Tarek Hassine, Hachmi Ben Daly and Marie France Lacrampe

"Contribution for a better characterization of the tensile mechanical

behaviour of flax/PP biocomposite materials"

Mater. Res. Express 5 (2018) 125504  PUBLISHED 28 September 2018  IF: 1.151

------------------------------------------------------------- 

A24.2018- Raja Ouled Ahmed Ben Ali and Sami Chatti

"Simplified springback prediction of thick sandwich panel"

Journal of Sandwich Structures & Materials 0(0) 1–20 The Author(s) 2018  IF: 2.776

DOI: 10.1177/1099636218779320

 ------------------------------------------------------------- 

A25.2018- Sana Abid, RihabMessadi ,Tarek Hassine, Hachemi Ben Daly, Jérémie Soulestin, Marie-France Lacrampe

"Optimization of Mechanical Properties of Printed Acrylonitrile Butadiene Styrene Using RSM Design ". 

 DOI: 10.1007/s00170-018-2710-6(2018) The International Journal of Advanced Manufacturing Technology, Septembre 2018   IF=2.601

 ------------------------------------------------------------- 

A26.2018- Riheme SARRAJ, Wissem Elkhal Letaief, Tarek HASSINE and Fehmi GAMAOUN

"Modeling of rate dependency of mechanical behavior of superelastic NiTi alloy under cyclic loading", International Journal of advanced manufacturing technology,  DOI: 10.1007/s00170-018-2872-2  IF: 2.601

 ------------------------------------------------------------- 

A27.2018- H. Elgolli1 & A. Houidi1,2 & A. Mlika1 & L. Romdhane1,3

"Analytical analysis of the dynamic of a spherical parallel manipulator

The International Journal of Advanced Manufacturing Technology

 https://doi.org/10.1007/s00170-018-2939-0

Accepted: 24 October 2018 , online: 09 November 2018  IF: 2.601

 ------------------------------------------------------------- 

A28.2018- Mariem Dakhli & Atef Boulila & Pierre-Yves Manach & Zoubeir Tourki

" Optimization of processing parameters and surface roughness of metallic sheets plastically deformed by incremental forming process"

The International Journal of Advanced Manufacturing Technology https://doi.org/10.1007/s00170-018-03265-x   IF: 2.601

 ------------------------------------------------------------- 

A29.2018- Ahmed Bahloul, Chokri Bouraoui

"The overload effect on the crack-tip cyclic plastic deformation response in SA333 Gr 6 C-Mn steel"

Theoretical and Applied Fracture Mechanics xxx (2018) xxx-xxx  Contents lists available at ScienceDirect  

https://doi.org/10.1016/j.tafmec.2018.11.004

Received 23 July 2018; Received in revised form 25 October 2018; Accepted 7 November 2018

Available online xxx 0167-8442/ © 2018   IF: 2.215.